View Full Version : Inquisitorial Krieg anyone!

Pages : 1 [2]

20-08-2007, 21:08
HatO, I did try that, well using GW paints, but using the Mechrite Red first, did it on the Incinerator GK in this thread, as you can see, looks the same, and in the end still needed a good few coats of Red Gore to ensure that the colour came out the same as the others, so maybe if I had started with that on all of them, less work would have been needed, but meh who knows! I have enough Red Gore to last me for now, so will worry about that when I need too!

Back from work now, and so if I can be bothered I may finish the Assassin, won't get any pics tonight, as I need my bro's PC for that and hes in bed, since he has school tomorrow. But tomorrow I will get pics up for you, honest!!!

21-08-2007, 10:32
Morning all, finished the assassin last night, just needs a coat of varnish and I shall snap some pics for you. I think shes turned out really well TBH, and I feel the pose is fairly dynamic, something I often have trouble with. So all in all I am pleased with the way my assassins have come out, and they look good on the table.

Pics later, I promise!!

21-08-2007, 11:27
OK, so I know this is the 3rd post in a row from me, but there is something useful in this one, the finished death wench!! Pics are below, comments and crits as usual are appreciated.

Cheers for looking!


There ya go!

Slaaneshi Slave
21-08-2007, 11:55
That looks really good! I admit I was a little scheptical when I saw her WiP pics earlier on this page, but I like that very much. Gives me a few ideas for my own DCAs. :p

Making several posts in a row is fine in your own blog, I always thought, so long as its not actually spam. :p I do the same in mine, if its any consolation. :p

21-08-2007, 11:59
Ah, you got her finished then. Looks good. The base really adds some size to an otherwise quite small model. Nice work KS.

21-08-2007, 16:42
Cheers guys.

@Catferret yeah I saw the models and thought if they are on 25mm bases on a battlefield then you are going to lose them, and forget about them, so why not stick them on bigger bases.

Bought a Chimera today for my Inq Stormie to ride aboot in. Quick question even though I am using the Chimera out of the Daemonhunters codex, could I still field it with an Imperial Armour weapons turret, i.e with an Autocannon etc and would that still be allowed? Because I want it to have a bit more of an interesting weapon.

And any cool ideas for what to do with the Chimera are appreciated.

Slaaneshi Slave
21-08-2007, 16:46
The Inquisitorial Chimera entry in IA2 lists all the non Codex entries along with the normal ones - Twin Linked Heavy Bolter, Heavy Flamer and Autocannon. Without going into any details about the stats, I advice you to use a Heavy Flamer turret, as its both fitting for a Inquisitorial force, and cheap (and you want transports as cheap as possible, without sacrifising needed upgrades).

21-08-2007, 16:54
Yeh GS =I= would look cool, but I am not very good with GS, specially not small fiddly things like that, maybe if I cut them out of plasticard may work, I have some fairly thin plasticard.

Why dont you use the brass etched =I= symbol sheets that forge world produce? there are some really small ones on there.

21-08-2007, 17:25
Oh right, so if I wanted too, I could use an Autocannon etc though? cheers

@Nyarlathotep, I do use them now, if you look on the left shin of each DK there is one of the brass etch =I= symbols.

23-08-2007, 17:37
Right an update of sorts. There is pics, but they are of something diff that I want you to have a wee look see at for me!

On the daemonhunters side of things I was waiting on my delivery of plasticard and green stuff to get here so I could keep working on the interior of my Chimera. And the good news is that it turned up this morning, and so within the next few days I will get some pics up of the WIP Chimera.

Now I started painting the new jump chaplain for my mates DA army. So here he is so far, bear in mind very WIP still, so dont crit on the little mistakes, as all will get fixed. I mainly want some feedback on the freehand DA symbol, this is my first freehand attempt on anything significant. Now after I took the pics I realised that the 2 wings of the symbol arent even, that is now sorted.

Onto the pics then eh


Face is more or less done, as is the gold I think. The parchment is nearly done as well, although it may need a furthur highlight.

C and C appreciated for this as I want it to turn out really well in the end.

Slaaneshi Slave
23-08-2007, 19:10
It looks very promising , and the freehand is amazing. To think I saw a doubter at the top of this page. :rolleyes:


24-08-2007, 13:47
The DA badge on the shoulder looks great.

The gold looks good so far.

More comments when you get more done! :p

24-08-2007, 15:11
Hey nice work on the DC assassin, looks very nice on that base!

Loving the free hand on the chaplain mate, very very well done cant wait to see the finished results.

24-08-2007, 16:00
Right well you won't have to wait long because I have just finished the Jump Chaplain, and as with the Libby I painted I am damn annoyed its not my model as I feel its one of the best I have ever painted. It is dullcoted and flocked, so there isn't much more I can do with it. C and C welcome!!

Freehand DA symbol
Company Symbol


24-08-2007, 16:02
good work on the freehand Kayvie :p

nice stuff mate, keep it coming


24-08-2007, 16:24
mmmmm, that is a very nice mini mate.

Maybe you should do dark angels at some point, yes?

Well now thats done...back to the inquisition! i need to see more to get my motivation up.

24-08-2007, 16:27
Maybe I should. Although I have definitely promised myself no more models until my Raven Gaurd are finished. For those that are interested that amounts too:
1 Dreadnought
1 Techmarine
3 Assault Termies
5 Devastators
3 Devastators (Touch ups only)
10 Tactical Marines

And my Daemonhunters I have still to do:
2 GK's
1 GK Dreadnought
1 Acolyte
1 Chimera

And once all that is done then I can buy more minis, obviously that rule doesn't apply to GD, but hey all I buy there will be minis that I have always wanted or just for the "oo" factor.

So your vote, out of all that, what do I do next?

24-08-2007, 16:30
Techmarine, even more so if its the servo harness one.
I love anything mechanicus and i think you will do a damn good job of it mate.
If not that do the GK dread

24-08-2007, 16:31
Assault Termies! I like Termies.

Slaaneshi Slave
24-08-2007, 16:36
He looks great! I particularly like the subtle highlights and the gold (which I am experimenting with myself on the Inquisition stuff in my blog). Keep it coming, but get away from the mutants and get back to His glorious Inquisiton! :P

24-08-2007, 16:40
Its an old Techmarine given a new lease of life with one of the new plastic termy Thunderhammers, and a repositioned servo arm (not a servo harness).

O.o just realised I have more plasticard and so could maybe finish off the fingers on the GK Dread force halberd, we shall see. I don't wanna give the Chaplain back to my mate!! lol, I wanna keep him.

24-08-2007, 16:53
Looking good there Shrike. I have the same Chappie, and I have to say it's a fantastic model. Really nice freehand on the chapter badge, too.

Asi the Red
24-08-2007, 21:21
Very nice Chaplain Shrike.
My vote's for the GK's - troops before tanks. Otherwise for the GK Dreadnaught.

24-08-2007, 21:41
Well before I went out to see my mates band play (just back now from that) I started work on the Techmarine, the poor guy was sitting on his own undercoated, screaming "PAINT ME, PAINT ME!" so I did. He has has a few layers of red gore, and the brown wash, then another coat of red gore.

May not be much painting done over the next few days as I have work tomorrow, then going to see the gf for the weekend.

But check back as there will be an update as soon as possible!

29-08-2007, 11:41
Right well I have got the red pretty much done on the Techmarine, just a highlight with some blood red and that will be done. Do you think that doing the toothed shoulder pad rims in alternate black/white would look good? Got the day off on Thurs, so will do some more work then, and put some pics up for you!

29-08-2007, 11:41
Keep up the good work!

Slaaneshi Slave
29-08-2007, 20:51
Hurry up with that Techmarine, then crack on with your Inquisition! We're waiting with baited breath. :p

29-08-2007, 21:11
OK, OK. Right well I have the day off tomorrow and so hopefully will get the Techmarine done, if not more or less done. Then I will do more Inquisition, though what shall I do? The list that needs done is earlier in the thread for you to choose!!!!

29-08-2007, 21:16
heh you're a student you're always off [/al murray] :D


29-08-2007, 21:22
I am off Uni yes, but alas something has to pay for the beer and that would be my crappy job, the job that keeps me there until ungodly hours of the morning. (14 hour shifts are not fun, and as a result I now loath weddings)

Slaaneshi Slave
29-08-2007, 21:55
14 hours? Thats a normal working day for me... Well, 10-11 normally, then up to 14-15 1 week out of three when I'm on duty. :(

29-08-2007, 21:58
Yeah but this is just a part time job for some cash lol. And we don't get any breaks, so am on the go on my feet for that length of time, not fun.

Right well since there is some interest here, here is the Techmarine as it stands, bear in mind this is very WIP. But I would like your thoughts on the red, as its the most complete.



29-08-2007, 22:32
The Chaplin looks sweet and freehands cool :) ,the Tech marine is looking good ;) looking forward to seeing him all finished

05-09-2007, 22:24
Right I apologize for the lack of updates, but I have been working a hell of a lot and so haven't had much time for anything really!! I am off tomorrow and so will get some WIP pics of my Chimera interior.

So until tomorrow!! Adios

10-09-2007, 09:57
Right due to my house being fairly disrupted by building work, and fitting other things in around my hectic work schedule, I haven't got any painting done. I have made benches for the inside of my Chimera however, and only now do I regret not getting "grip plate" pattern plasticard when I last bought some, so completion of the Chimera will wait until I can get some of that to finish the interior.

And I will be upheaving all again in a few weeks when I move over to my new flat, but this year I have the internet for sure, so unlike last year I can continue to feed you lot pictures!

Will hopefully get some pics up soon, so please check back.

10-09-2007, 10:43
OK, so this time I honestly have an update for you. Here are WIP pics of the interior of my Chimera.


I will try to get some painting done on something today, though doubt I will get much done. Its nice and sunny here today but its bo****ks freezing in my room (could be coz there are no bricks on one wall, and the roof slates are being removed as I type this)

Cheers for comments.

10-09-2007, 11:04
nicely done, don't forget those plump seat cushions, cross country on hard metal aint fun!

10-09-2007, 11:10
No I am sure its not! I don't know if I am up to GS'ing them though, thats all. I will give it a go at somepoint though!

Just primed my last 2 GK, so will make a start on them when they are dry. Not sure how much I will get done though since I have to go to work at 3.

10-09-2007, 11:33
Good luck on the interior Shrike. You look like your onto a good start.


10-09-2007, 13:20
Is it just me or are the seats a little high up?

Still looks ace though KS.

10-09-2007, 13:53
oh man thats really coool! i like it a lot, you know what it needs though?!.... tread plate on the floor...lovingly weathered!


Inquisitor D'selinas
10-09-2007, 15:10
Yep, that's definitely a cracking start on that Chimera.
Its got me a hankering to have a go at something similar myself!

10-09-2007, 20:54
@Catferret, if they are any lower then they would just look odd I think.

@SC, cheers man, and yeah it will get tread plate, when I get some!! I didnt get the Chimera til after I had ordered my last bunch of stuff from Atenocitis Workshop, so it will have to wait until the next time.

Any other ideas of what I could put in there, other than tread plate and padding on the seats is welcome, I am kinda stuck for ideas there!

13-09-2007, 21:18
Hey there, sorry for the lack of updates, but its a little hectic at home just now with all the building work going on and me being relocated to the dining room for now. Though I did get bored and crack open the paints today and made a start on the last two GK's.

The red is not as bright as the pictures show, I am using my Mums camera for these and I think it was set on high colour, not sure as I don't use it much so don't know all the settings! Though the pics are clearer than with my mobile.

Bear in mind these are uber WIP.

Comments and Crit as usual.


Ta for looking!

13-09-2007, 21:27
Comments and Crit as usual.

You smell and your clothes are terrible. :p

EDIT: Oh you meant the model...

The pics are very clear. The red is scaring me though. Good job it doesn't actually look like that!

Should look good when you finish it.

13-09-2007, 21:38
Cheers CF, and my clothes don't smell do they....

Once the red has been highlighted it will look better and once all the other colours and details are done then it will come together, if not Dullcote sorts all!!

Here is another update, decided since I had the camera I would take more pics, here is the WIP Dreadnought, base is only primed, and the torso has had some colour on it, still a fair bit to do on it though.


C and C on the model, not my hygiene, which is top notch thank you!

13-09-2007, 22:13
lookin' good as usual :)


13-09-2007, 22:21
The Dread's looking good. What's that it's standing on?

14-09-2007, 16:21
Tis standing on an Ungor, basically coz it looks like a 'lil daemon. I thought it was quite cool, even though in RL the daemon would be pulverized by the weight of a dreadnought, but hey I can dream!

Inquisitor D'selinas
14-09-2007, 17:13
I say, there are many nice things in this here log :D
Thats a nice rich red on the Grey Knights, is it the Foundation paints new one?
Tell me, tell me, tell me :D

14-09-2007, 17:23
Your dreams are strange indeed.

14-09-2007, 17:28
Hell no, its layers of Red Gore done painstakingly by my own fair hand! lol

May get some painting done later, though don't count on it, since my aunt and uncle are here for the night and using my room, well I say room, it is in fact the dining room but due to building works I am in there for now, and now getting kicked out of there for the night!!

21-05-2008, 11:31
OK, so you lot might, or might not have noticed a distinct lack of my presence for the last almost a year now!
Well thats because I have been on the Ammobunker, another forum that is soley dedicated to modelling/painting etc. The community there is great, welcoming and supporting.

Anyways in the mean time I have almost finished my Raven Guard army, just 2 units to do now. And my DH have grown a bit as well.

Here are some pics of what I have been doing.


Psyker for my DH


Deamonhost for my DH.

Cheers for looking!

21-05-2008, 11:31
Sorry for the double post, but silly pic limit means its a must!

Thats another thing, Ammobunker has a much larger pic limit!


RG Predator from FW


23-05-2008, 15:32
No comments at all?

Not one?

23-05-2008, 15:37
The pred is really nice. I like the atennae. Its an especially nice touch.

24-05-2008, 01:04
Renegades ? We want krieg ! :P

24-05-2008, 01:26
No comments at all?

Not one?

Um, silly Gav-face?


Looks pretty darn cool. I like the fact it ain't pure black. The subtle dust/weathering looks good.

24-05-2008, 04:32
would u mind if i "stole" ur idea of inquisitorial krieg.

i plan on inducting a couple of squads into my SoB army for some added firepower.

i also think i may steal whoevers idea it was to put the =][= onto their coats

keep up the great work

25-05-2008, 16:38
They are not Renegades lol. I use the floating Psyker as a Psyker in my Inq reintue, as he has no Chaos icons on him, so can be passed off as a psyker. The other guy I use as a Daemonhost, which can explain the chaos symbol on his chest. He has a manacle on his ankle to show hes restrained.

I have more DK Grenadiers on the way, so there will be another squad sometime in the future. There is also a Chimera for these guys too.

Here are some more pics


2 of my 3 Vindicators


Scratch built Inq back hatch on Chimera


25-05-2008, 23:37
While I like the Predator turrets on Chimeras I think people often fall foul of the mounting/turret ring on them. Personally I would be filing/sanding the ring and reducing it to at least half the thickness. It currently looks to vulnerable to a well placed rocket.

Inquisition top hatch is cool though.

26-05-2008, 16:55
Yeah I see what you mean. I might put some sandbags round there to add something more to the vehicle and also some proctection.

26-05-2008, 18:50
Great work there Kayvaan, Death Korps make great Inquisitorial Stormtroopers! I had a squad in my Daemonhunting force once......

But yes, lovely scheme you got there too, and your tank-building skills are rather enviable! Looking forward to more from you.

26-05-2008, 22:59
Just tonight I finished my Raven Guard army off. Here are the pics.


So now I will move on to finishing my Daemonhunters. Have a Dread to finish, an Acolyte, a Chimera and another 10 DK when they arrive.

01-06-2008, 21:35
Well I have made a start to my new IG army.

Here are some pics of the first 5 guys.

And the heads I am using

The heads are from Westwinds seperate head system, and are the WW2 Brit Para heads in helmets and berets. They are the closed I could get to modern UK helmets. The armys theme will be modern British forces. So they are going to be in desert camo, and the lasguns are converted to look like L1A1 SLRs are the SA80 is too hard to do, and they don't fit on Cadian arms anyway.

C&C please!

01-06-2008, 22:21
Nice stuff bro.

I really like the guadsmen and how they turned out.

I particularly like the demonhost, brilliant idea, and an osome execution.

The tanks seem pretty mundane compared to the 'wild' conversions you've done for the infantry, but I think that's alright, tanks are centre pieces to begin with anyway, the infantry should have some spotlight!


02-06-2008, 21:36
Cheers mate.

The Chimera is for the Inq Stormtroopers. Not great with tanks, not had many really, and marine ones don't lend themselves for conversion very well.

I think that for the IG being British themed, some conversion will have to go on with their tanks. Chimeras could be converted to look more like Warriors if possible. Basilisks I was going to use the FW ones, as they look like AS90s already, or if I was being brave I could try to convert them. Schoolcormorant has just done that over on the Ammobunker, and it looks really good, so its possible.

Stay tuned, will update when theres something more to show!

03-06-2008, 01:13
SA80's are doable if you can be bothered shelling out for the Elysian rifles from FW. A bit of filing and resculpting gives you a weapon very close to an SA80. Fits Cadian arms with a little work.

10-02-2009, 14:33
Will probs get shouted at for ressurecting this very dead thread, but its better than starting a new one.

Not been around much as I have been busy with my involvement at the Ammobunker.

I have recently started painting the new Hector Rex and retinue and have finished the 3 cronies so far. They are based the same as the rest of my daemonhunters army, which is slowly increasing in size. I have 4 Termies (GK) undercoated and ready to add into the force as well.

Pics below, enjoy.


10-02-2009, 14:59
Basically I Made My Entire Account To Post On Your Blog Lol :)

I've been out of the hobby for about 3 years now, and sold a daemonhunter and guard army.

However the combination of Krieg releases, Inquisitor Rex, and seeing some of the wonderful minatures you've been putting out have inspired me to start again- not to mentiont he fact that my girl friends buying me old rexy boy as a valentines present :)

And so basically I would just like to say- nice painting and modelling,
and also that once my new army is up and running- which will be some time in the next month as I'm going new york on monday, that I hope you comment on my blog and also that you continue with yours!

Your Raven guard are also nice btw, I have a soft spot for marines as the only army I kept was my crimson fists.

So anyways nice models, keep at it, and subscribed!

10-02-2009, 15:44
Wow, thanks! Glad that you are getting back into things, and that my minis have given you some inspiration.

Just a note, I mainly post over on The Ammobunker now (same username) so feel free to join there as well, and stick a log there. http://s3.zetaboards.com/The_Ammobunker/topic/176217/1/

Thats the link to my log on the site.

Thanks again for the comments, and I will keep an eye out for your log on here and perhaps on the 'Bunker!


17-02-2009, 12:25
Right I have made a start to the Inq Rex model himself now. Well to be exact, his storm shield. Here are some WIPS.


The gold on the shield is still WIP, as is the red (just needs 1 more highlight).

The bone colour on the hand is the same as how the rest of his armour will be.


Col. Wales
17-02-2009, 22:58
Very nice stuff and it isnt necro if its your thread...

18-02-2009, 21:18
Cheers Col. Wales.

Doing more work on the shield, and also trying out the armour colour on the Inq himself, you never know might not look right in the end, so checking it out just now.

Belial's Apprentice
20-02-2009, 23:47
What an amazing colour scheme. I was looking for a dirty red to paint my khorne warriors (I know its heresy, just dont send your inquisitor to hunt me down haha). Im looking forward to your Inquisitor Rex model being completed.

01-03-2009, 21:40
Cheers for the comments.

Haven't done much more as Uni has been busy etc etc. But I did start painting the Inqs leg armour, so you can get a better idea of how it looks on the model himself.


And over on the Ammobunker we run a monthly competition. This months was "Hero and Retinue" So I did a Wolf Lord and Wolf Guard. Final pic of the entrants is below. I have bigger, clearer pics of the indovidual models if anyone would like me to put them up, let me know.


C&C cheers

01-03-2009, 21:47
I'd like to see them!

The inquisitor is looking really nice so far but I love the space wolves.
Really nice work mate! Very dynamic!

01-03-2009, 21:54
Here are some more pics of the Wolves.


Cnt'd in next post.

01-03-2009, 21:56

And heck while I am here have some Salamanders as well.


Cloak on the Captain is scratch-built.


02-03-2009, 16:46
Wow I used to collect Spacewolves!

You really are a good painter :)

My Rex has finally arrived (My girlfriend ordered it ont he 2nd of February hoping it would be here for valentines; it didn't arrive until today :\)
But I'm going GWon friday to pick up some paint tips for him as I want to try something new to me when attempting to do such a good model justice- fromt he look of your work you will be!

02-03-2009, 21:31
Thanks Munting. I like to think my painting skills have come on over the years! The Space Wolves won't be an army, they were just a one off. I do have the remnants of a Space Wolf army though.

RL is busy and so no progress really. I have some AI planes to paint up as well, so can show them here when they are done. Need to get them done soonish as there is a deadline of 26th April for them, due to them being needed at the Ammobunkers Open Day at Warhammer World.

04-03-2009, 21:43
Here are some more WIP shots of the Inq. They make the armour look more patchy than it is, its smoother in RL.



16-03-2009, 21:02
Well here are some more WIPs of the guy above.

Face is now done, as is the hair.


Update continued in next post.

16-03-2009, 21:03
Have been working on a Chaplain for my Salamanders as well. Here are some WIPs.


And his base


C&C welcome.

segmentum solar
16-03-2009, 21:06
good stuff, hector rex is coming on nice, i hope to get mine delivered from forgeworld any day soon :)

Belial's Apprentice
21-09-2009, 12:08
The Inquisitor is looking fantastic!! Wish Forgeworld was more accessable here in Aus!! haha