Rubble works going strong CB.
Printable View
Rubble works going strong CB.
Thanks Jacka,
Another three Eschers finished.
https://i.imgur.com/HPTRb1H.jpg
The gang is getting larger.
https://i.imgur.com/dd6q8wO.jpg
The long painting war continues...
CB
Three more completed Eschers including a Gang Leader and another Juve.
https://i.imgur.com/SAE3m6b.jpg
Entire gang so far.
https://i.imgur.com/LXALpmb.jpg
As I am short on longer ranged weapons, the last two remaining unpainted are a Leader with a Bolter and a Ganger with an Autogun joining via eBay.
The long painting and converting war continues...
CB
Started a project using the filter, in the meantime I finished some more Cawdor gang members: Leader and a Heavy.
https://i.imgur.com/UUL5DHm.jpg
https://i.imgur.com/iV2n6jy.jpg
https://i.imgur.com/yEg7mSy.jpg
The gang so far.
https://i.imgur.com/dW6nzXq.jpg
The long painting and converting war continues...
CB
I like these guys CB, they have a very Gothic feel.
Thank you Colonel Jacka,
Two more finished.
https://i.imgur.com/bJZoug7.jpg
https://i.imgur.com/Zlr0UDS.jpg
https://i.imgur.com/aDOjSZQ.jpg
https://i.imgur.com/S9D1Ac1.jpg
The whole gang so far, four more to go.
https://i.imgur.com/qjWUZ51.jpg
The long painting and converting war continues...
CB
The water filter into some sort of power plant project begins.
Some of the things I will need.
https://i.imgur.com/xeadxPM.jpg
Cheers,
CB
Water filter project is on hold while I do some Necromunda terrain.
Taking some old Necromunda bulkheads and some polystyrene card to make a test structure.
Roof made from 0.6 thick polystyrene card with raised edges.
https://i.imgur.com/bSHRFq1.jpg
Sides made from old Necromunda bulkheads
https://i.imgur.com/kto2SFc.jpg?1
Ends with old Necromunda bulkheads with a doorway.
https://i.imgur.com/J1axvpz.jpg?1
The long painting and converting war continues...
CB
So far so good- I look forward to how this turns out. I quite like those old bulkheads. I have a pretty decent collection of them from when I wanted to build a 4' by 4' space ship interior.
Thanks Codsticker,
Yes, the bulkheads are great and I am glad I bought some extras when GW used to sell them.
Adding vents and some hatches to the top in the lower center.
https://i.imgur.com/4ljsHTy.jpg?1
Adding a lip to the overhang.
https://i.imgur.com/jbuIU8A.jpg?1
First layer of paint and primer.
https://i.imgur.com/FWXO95l.jpg?1
Masking for the hazard stripes.
https://i.imgur.com/96l38df.jpg?1
More to come after I get some yellow on the edges.
The long painting and converting war continues...
CB
Here is the result after touch-up and weathering.
https://i.imgur.com/RBEUyr9.jpg?1
https://i.imgur.com/BSFlYf2.jpg
https://i.imgur.com/AbXQJRe.jpg
https://i.imgur.com/30dy0Sz.jpg
https://i.imgur.com/27fMAac.jpg
I did not add graffiti as the sides of the model really do not have much in the way of flat space. What this has confirmed is I probably want to paint the bulkheads prior to fixing them to the floors for the towers.
The long painting and converting war continues...
CB
CB,
Looking good mate and so inexpensive.
Looks great CB- nice weathering and colour choices.
Can’t wait to see it finished
Thank you Colonel Jacka
Thanks Codsticker
Thank you Mr Scratch & Sniff,
I do not think I will ever finish, but here are some photos of a table set up for a battle using a large amount of what I have been building.
https://i.imgur.com/wAvRZvz.jpg
https://i.imgur.com/aNPnSZu.jpg
https://i.imgur.com/Y5OiG3X.jpg
https://i.imgur.com/daSyUW7.jpg
I will get back to the filter terrain...which will be a heat exchange power station.
The long painting and converting war continues...
CB
That is plenty for a good game. It looks like the out skirts of a devastated city.
CB,
That looks great. Very understated colours. Great use of cheap materials.
Thank you gentlemen,
Alright, now back to the water filter build.
Parts, although I ended up using some copper wire vice the phone wiring. I also dropped the zap-it straps for paper cut with some of Ms. Captain Brown's special scissors.
Removed the bottom of the filter.
Then drilled holes for the copper 90 degree bend pipes...and to get some charcoal out of the filter as it is quite heavy compared to other terrain pieces.
For the top I added cut paper to simulate some detail and a pair of cog buttons.
Then on the opposite side I drilled two smaller holes so I could secure the filter to the gang box. This was so the terrain would be nice and solid and not just have epoxy holding it together. Also allowed me to get some more charcoal out. The glued a pair of half a plastic clothes peg on each side with two part epoxy.
https://i.imgur.com/LJPnUDm.jpg?1
More to come as the long painting and converting war continues...
CB
Very interesting so far.
Thanks Codsticker,
Next up was the gang box portion.
I started by sawing through the extensions until I had a nice rectangular box. This took so long that I decided not to complete the job by sanding the top flat. Instead I decided to use some of the plastic detail and incorporate it. So some old Rhino hatches became building hatches.
https://i.imgur.com/Ue9sqVG.jpg?1
Then I added old railings to three sides of the top deck.
https://i.imgur.com/ZSaPpND.jpg
Now the one short side I was placing railing was too long for one and two short for two, but I had a plan for that.
Then for an access door I used a Rhino top hatch.
https://i.imgur.com/5tZ7IAw.jpg?1
Then flanked it with two plastic close pegs. Which conveniently filed the two gaps in my railing.
https://i.imgur.com/S6e8ah0.jpg?1
I then prepared the other end for the water filter using some old scrap plastic. I just wanted the transition to look a little more realistic than just slapping the filter onto the back of the gang box.
Added more up on the deck and sanded it to match the curve of the filter.
Then with some drywall plugs I dry-fitted the filter to the gang box.
Not before starting to add some bling to the sides of the gang box and some lights for the filter.
https://i.imgur.com/0kFYlac.jpg?1
https://i.imgur.com/XyyVkfZ.jpg
More to come.
The long painting and converting war continues...
CB